Third, construction requirements
1. When the conference area enters the building to transport goods, it should be entered from entrance C23. Only cargo elevators are allowed, and passenger elevators and escalators are prohibited.
2. When transporting goods, the construction unit shall take protective measures for the door of the office to avoid bumping and damaging the door body.
3. Before entering the hall, carpet or plastic film should be laid in the room and then put the building materials. For example, to build the stage, all structural floors must be laid with plastic film and then a layer of wood with a thickness of not less than 10mm.
4. When the banquet hall and conference room are set up for exhibition construction, the entire room should be first laid with a layer of plastic film, and then two layers (each layer is not less than 18mm thick) wooden board can be built;
5. The construction unit shall be equipped with appropriate fire extinguishers when entering the construction site, and shall carry out construction in strict accordance with the submitted booth drawings. The construction area shall not exceed the scope of the booth.
6. When encountering the fixed facilities of the venue (such as columns, etc.), the construction unit shall make the planning after measuring the actual amount.
7. All temporary facilities (booths) shall not exceed the limited height of the venue:以上翻译结果来自有道神经网络翻译(YNMT)· 通用场景

逐句对照
AI润色

2025 China (East China) International Surface Treatment Industry Expo

The 8th (Yangtze River Delta) International Electroplating, Painting and Intelligent Environmental Protection Exhibition 2025

At the same time, the 2025 Summit on the development of new environmental protection materials, new technologies and new processes will be held

Time: May 8-10, 2025 Venue: Nantong International Convention and Exhibition Center

2025 China (East China) International Surface Treatment Industry Expo will be held in Nantong International Convention and Exhibition Center from May 8 to 10, 2025, the exhibition is expected to exhibit an area of 10,000 square meters, more than 300 exhibitors, and the number of visitors is expected to reach 15,000. With the theme of "Promoting the upgrading and development of the surface treatment industry, intelligent manufacturing creates the future", the exhibition focuses on the upgrading and innovation of intelligent manufacturing, focusing on the latest processes and solutions in the surface treatment industry, and promoting the product innovation and upgrading of the surface treatment industry. During the same period, a number of technical seminars and activities will be held, inviting domestic and foreign experts and representatives to interact, discuss the development trend of the industry, and share their own experience. At that time, warmly welcome domestic and foreign new material enterprises and their related industries to visit and exchange!